Cisco 7935 - IP Conference Station VoIP Phone Administration Manual Download Page 50

Page: 50 / 94

Chapter 3 Configuration of the Cisco IP Conference Station 7935

Verifying System Settings

3-4

Cisco IP Conference Station 7935 Administration Guide

78-12727-03

CallManager 1 Address,
CallManager 2 Address,
CallManager 3 Address

Identifies the
Cisco CallManager systems that
are available for processing calls
from this IP Conference Station.

Set automatically from
Cisco CallManager.

Main TFTP

Indicates Trivial File Transfer
Protocol (TFTP) Server address
used by the
IP Conference Station to obtain
configuration files and the
firmware.

Set automatically if DHCP is
enabled.

Alt TFTP Addr

Indicates an Alternate TFTP
Server address used by the
IP Conference Station to obtain
configuration files and the
firmware.

Must be manually set.

Alt TFTP

Indicates whether or not
Alt TFTP Server is enabled.

Must be manually set.

Boot Load ID

Indicates the current load ID of
the firmware.

Set automatically by the
IP Conference Station.

App Load ID

Indicates the current load ID of
the software.

Set automatically by the
IP Conference Station.

HW (hardware) Revision

Indicates the hardware revision
level.

Set automatically by the
IP Conference Station.

SW (software) Version

Indicates the firmware version
loaded on the
IP Conference Station.

Set automatically by the
IP Conference Station.

Dial Tone

Indicates the dial tone setting on
the IP Conference Station.

The default is Tone 1.

Ringer

Indicates the ringer sound setting
on the IP Conference Station.

There are five ringer sounds. You
can also shut off the ringer
sound.

Time

Indicates the time setting on the
IP Conference Station.

There are two time format
settings.

System Setting

Description

Usage Notes

Summary of Contents for 7935 - IP Conference Station VoIP Phone






























































































Search results

Summary of Contents for 7935 - IP Conference Station VoIP Phone

Reviews:

Related manuals for 7935 - IP Conference Station VoIP Phone

Brands by name

Popular brands

Cisco 7935 - IP Conference Station VoIP Phone, Administration Manual

Search results

Summary of Contents for 7935 - IP Conference Station VoIP Phone

Reviews:

Related manuals for 7935 - IP Conference Station VoIP Phone

Brands by name

Popular brands