Cisco 7935 - IP Conference Station VoIP Phone Administration Manual Download Page 49

Page: 49 / 94

3-3

Cisco IP Conference Station 7935 Administration Guide

78-12727-03

Chapter 3 Configuration of the Cisco IP Conference Station 7935

Verifying System Settings

MAC Address

Indicates the unique Media
Access Control (MAC) address
of the IP Conference Station.

Cannot configure.

IP Address

This is the IP address assigned to
the IP Conference Station.

The IP address identifies the
IP Conference Station on the
network.

Set automatically if DHCP is
enabled.

IP Mask

Indicates the subnet mask used
by the IP Conference Station.

Set automatically if DHCP is
enabled.

Router 1

Identifies the default gateway
used by the
IP Conference Station.

Set automatically if DHCP is
enabled.

Host Name

Identifies the unique host name
assigned to the
IP Conference Station.

Assigned through
Cisco CallManager.

Domain

Identifies the domain in which
the IP Conference Station
resides.

May be assigned through the
DHCP server.

DNS Address

Identifies the DNS server
address for the
IP Conference Station.

May be assigned through the
DHCP server.

Op VLAN ID

Indicates the Virtual Local Area
Network (VLAN) in which the
IP Conference Station is a
member.

VLAN ID assigned to the
IP Conference Station via CDP.

Adm VLAN ID

Indicates the VLAN in which the
IP Conference Station is a
member.

VLAN ID assigned to the
IP Conference Station by the
system administrator. See the

“Configuring VLAN Options”
section on page 3-10

Note

This setting is ignored, if
the VLAN ID is assigned
via CDP.

System Setting

Description

Usage Notes

Summary of Contents for 7935 - IP Conference Station VoIP Phone






























































































Search results

Summary of Contents for 7935 - IP Conference Station VoIP Phone

Reviews:

Related manuals for 7935 - IP Conference Station VoIP Phone

Brands by name

Popular brands

Cisco 7935 - IP Conference Station VoIP Phone, Administration Manual

Search results

Summary of Contents for 7935 - IP Conference Station VoIP Phone

Reviews:

Related manuals for 7935 - IP Conference Station VoIP Phone

Brands by name

Popular brands