2-13
Cisco IP Conference Station 7935 Administration Guide
78-12727-03
Chapter 2 Installation of the Cisco IP Conference Station 7935
Installing the Cisco IP Conference Station 7935
Verifying Startup Process
After the IP Conference Station has been connected to power for at least 15
seconds, it begins its startup process by cycling through these steps:
1.
The following messages appear in the LCD screen display as the
IP Conference Station starts up:
–
Cisco Systems, Inc.
Polycom Technology
Copyright 2001
–
Renewing/Obtaining IP Address
Loading Application
Configuring IP
Press Menu to Reconfigure
–
Station IP (IP address)
Contacting (IP address)
–
Opening: CM IP address
–
Registering
Note
The startup process may take several minutes, and some of these
messages may not appear due to the access speed of your network.
2.
After the IP Conference Station has successfully registered with a
Cisco CallManager, the following information appears in the LCD screen
display:
–
Date and Time
–
IP Address
–
Local number
–
The message “Press the Phone Key to get a dial tone”
–
Corp Dir and Ph Book softkeys
If the IP Conference Station successfully passes through these steps, it has started
properly.
