3-5
Cisco IP Conference Station 7935 Administration Guide
78-12727-03
Chapter 3 Configuration of the Cisco IP Conference Station 7935
Accessing Network Configuration Settings
Accessing Network Configuration Settings
You must log in through Admin Setup in order to access the IP Conference Station
network settings.
Follow these steps to access the network settings:
Step 1
Press the Menu button.
Step 2
Press the Up or Down scroll button to select Admin Setup.
Step 3
Press the Select button.
Step 4
Enter the administrator password. (The default administrator password is **#.)
Date
Indicates the date setting on the
IP Conference Station.
There are two date format
settings.
Codec
Indicates the compression
setting on the
IP Conference Station.
Set automatically by the
IP Conference Station.
Net Config
Indicates the Ethernet port
configuration on the
IP Conference Station.
May be set to full (FDX) or half
(HDX) duplex.
Net Speed
Indicates the Ethernet port speed
configuration on the
IP Conference Station.
May be set to 10 Mbps, 100
Mbps, or Auto.
HTTP Port
Indicates the HTTP port through
which users access the Web
interface.
The default is 80. May be set to
any number. If you change the
default value, users will have to
use this number suffixed to the
IP address of the IP Conference
Station when they access the
Web interface.
System Setting
Description
Usage Notes
