manualshive.com logo in svg

Cisco 7935 - IP Conference Station VoIP Phone, Administration Manual

Share
Download
Cisco 7935 - IP Conference Station VoIP Phone Administration Manual Download Page 59

 

3-13

Cisco IP Conference Station 7935 Administration Guide

78-12727-03

Chapter 3      Configuration of the Cisco IP Conference Station 7935

Resetting the IP Conference Station

Step 3

Press the Select button.

Step 4

Press the Up or Down scroll button to select SW Version.

The firmware version number is displayed.

Resetting the IP Conference Station

If you reset the IP Conference Station, any changes made that have not been saved 
are lost and set back to the previous settings.

Follow this step to reset the IP Conference Station.

•

Press * * # * * on the dialing pad.

The message 

Restarting

 appears in the LCD screen.

The IP Conference Station re-starts and goes through the startup process.

Erasing the Local Configuration

If you want to erase all locally stored configuration options, you can do so by 
restoring all settings to their factory default values, including enabling DHCP.

Caution

Erasing the local configuration removes all user-defined changes made locally on 
the IP Conference Station, including the Phone Book. If you choose this option, 
these settings are set back to their default values.

Summary of Contents for 7935 - IP Conference Station VoIP Phone































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands