Chapter 3 Configuration of the Cisco IP Conference Station 7935
Accessing Network Configuration Settings
3-6
Cisco IP Conference Station 7935 Administration Guide
78-12727-03
Step 5
Press the Enter softkey.
Step 6
Press the Up or Down scroll button to select Network Setup, and then press the
Select button.
You can now access and change network settings.
Timesaver
You can also use the Cisco IP Conference Station 7935 Web Interface to change
network options. See the
“Web Interface” section on page 3-27
.
Changing DHCP Settings
DHCP automatically assigns IP addresses to devices when you connect them to
the network. Follow the appropriate procedures in this section to enable or disable
DHCP.
Enabling DHCP
DHCP is enabled by default.
Follow these steps to reset DHCP if it becomes disabled.
Step 1
Press the Up or Down scroll button to select DHCP.
If DHCP is disabled, the option displays as:
DHCP Disabled
Step 2
Press the Enable softkey to enable DHCP.
Step 3
Press the Save softkey.
Step 4
Press the Yes softkey to save your changes, or press No to cancel.
