Chapter 2 Installation of the Cisco IP Conference Station 7935
Preparing to Install
2-2
Cisco IP Conference Station 7935 Administration Guide
78-12727-03
Setting the Default Device Load
To set the default device load for the IP Conference Station in
Cisco CallManager, perform these steps.
Step 1
Copy the IP Conference Station load to C:\Program Files\Cisco\TFTPPath on the
Cisco CallManager server.
Step 2
Start Cisco CallManager Administration.
Step 3
Choose System > Device Defaults.
Step 4
In the Device Defaults Configuration window, scroll down to the Cisco 7935
Device Type.
Step 5
Set the Load Information to the load in TFTPPath.
Step 6
Scroll back to the top of the page and click Update.
Adding a New Device
To add the IP Conference Station as a new device in Cisco CallManager, perform
these steps.
Step 1
Choose Device > Add a New Device.
The Add a New Device page displays.
Step 2
Choose Phone from the Device Type drop-down list box, and click Next.
The Add a New Phone page displays.
Step 3
Choose the the Cisco 7935 phone type and click Next. (Once you select a phone
type, you cannot modify it.)
The Phone Configuration page displays.
Step 4
Enter the required fields as described in the following table.
