Chapter 2 Installation of the Cisco IP Conference Station 7935
Installing the Cisco IP Conference Station 7935
2-6
Cisco IP Conference Station 7935 Administration Guide
78-12727-03
Assigning Static IP Addresses
If you do not use DHCP in your network, you must assign static IP addresses to
each station, and you must configure each station locally.
The following procedure provides an overview of the steps you must perform in
Cisco CallManager. Refer to the Cisco CallManager Administration
documentation or online help in the Cisco CallManager Administration
application for additional information.
Step 1
Start Cisco CallManager Administration.
Step 2
Add a station to Cisco CallManager by selecting Device > Add a New Device.
The Add a New Device page displays.
Step 3
Choose Phone from the Device Type drop-down list box, and click Next.
The Add a New Phone page displays.
Step 4
Choose the the Cisco 7935 phone type and click Next.
The Phone Configuration page displays.
Step 5
Enter the required fields.
Step 6
Install the IP Conference Station by following the instructions in the
“Installing
the Cisco IP Conference Station 7935” section on page 2-6
.
Step 7
Configure the IP settings by following the instructions in the
“Configuring IP
Settings” section on page 3-7
.
Step 8
Configure the TFTP server by following the instructions in the
“Configuring
TFTP Options” section on page 3-11
.
Installing the Cisco IP Conference Station 7935
Before installing an IP Conference Station, be sure to verify that your network
meets the requirements that follow and that Cisco CallManager is properly
configured. Most importantly, review the safety precautions in the
“Safety
Notices” section on page 2-9
.
