CIRCLE FITNESS M8, Owner'S Manual

Page: 42 / 80

M8 – Owner’s Manual
Page
41
5. ENGINEERING MODE
5.1 ENGINEERING MODE 1: Information
In idle mode, press ( Clear) button and press “ 0020 ” on numeric keypad then press
(Enter) button. MESSAGE window shows “FACTORY SETTINGS ” once then provided the
information below:
NOTE: If (Clear) button is pressed but the number is wrong or no actions within 10
seconds, it can’t perform login. Please repeat the login process again.
Total Used Time:
MESSAGE window
shows “ TOTAL HOURS ” and TIME window shows total used hours
(0-9999) . When total used time is reached to 9999, it will reset to zero, and DISTANCE
window shows “1”. Press SPEED
▼
/INCLINE
▼
button to next setting.
Software Version:
MESSAGE window
shows “ VERSION ” and TIME window shows “ X.XX ” .
Total Used Distance: (Depends on the unit setting, Metric/Imperial)
MESSAGE window shows “ 0D0 ” and TIME window shows total used distance (0-9999
km/mi) .
When total used distance is reached to 9999, it will reset to zero, and DISTANCE
window shows “1”. Press SPEED
▼
/INCLINE
▼
button to next setting.
Average Used Speed: (Depends on the unit setting, Metric/Imperial)
MESSAGE window shows “ AVERAGE SPEED ” and TIME window shows the value . Press
SPEED
▼
/ INCLINE
▼
button to next setting.
* Average Used Speed= Total Used Distance/ Total Used Time
Error Message Record:
MESSAGE window
shows “ ERR HISTORY ” and CALORIES window shows the 1-5 (Error
record number 1-5) . DISTNACE & TIME window shows the total used time and SPEED
window shows the average speed when the error message occurred, press SPEED
▲
/ SPEED
▼
button to select 1 to 5. Press SPEED
▼
/ INCLINE
▼
button to next setting.
Language Selection:
Press SPEED
▲
/ SPEED
▼
button to select the preferred language.
Here are 8 languages for user to select:
ENGLISH /NEDERLANDS /FRANCAIS /ITALIANO /ESPANOL /DEUTSCH /PYCCKN/
TURKISH.
Press (Enter) button to confirm
and return to idle mode.
Press SPEED
▼
/ INCLINE
▼
button
to show the software version.