CipherLab CP55, Reference Manual

Page: 99 / 287

83
Chapter 2 Data Capture
To write data into an RFID tag:
1) Tap Write tab page.
2) Input the data you would like to write in the blank field below.
3) Press the scan key (or side trigger) on the mobile computer.
If data failed to write into the RFID tag, an error message will display in the Response
field below.
Note:
(1)
Generally the readable RFID data lies in user block. If the data to collect confides in a
non-user block such as the lock block, select
Display hex values lest the data to collect
involves any invisible character.
(2) Different RFID tags may have different default blocks (also “pages”), and different
amount of bytes and number of blocks. The data written will be truncated to fit inside
the blocks of the targeted RFID tag. Therefore part of the data may be discarded when
it comes to the end of a block. Refer to RFID Tag Default .
(3) You may set the start byte to read/write data and the length of the data to read/write on
the
Data Output page.
Set the block to
write data to
Tap to leave the
test scan page
Check to write
the data in
hexadecimal
format
If failure occurs
during data writing,
an error message will
be displayed in the
Response field
Input the data to
write to the RFID
tag