CipherLab CP55, Reference Manual

Page: 68 / 287

52
CP55 Mobile Computer Reference Manual
Scanner Preferences settings page opens.
Featured settings are different for each type of reader:
CCD READER SETTINGS
Setting Description Default
Decode Timeout Sets the maximum time (configurable from 1 to 9 sec) for
the decoding process during a scan attempt. 3 sec
Redundancy Level Sets how many successful readings should be done before
linear barcodes such as Codabar, MSI, and Interleaved 2 of
5 can be decoded. Levels 1 to 4 available.
The readings needed for each level are as follows:
Level Description
1 The following barcodes must be successfully
read twice before being decoded: Codabar, MSI,
Industrial 25 (Discrete 25), Interleaved 25.
2 All barcodes must be successfully read twice
before being decoded.
3 All barcodes must be successfully read twice
before being decoded, except for the following
which must be read three times: MSI, Industrial
25 (Discrete 25), Interleaved 25.
4 All barcodes must be successfully read three
times before being decoded.
Level 1
Scan Mode Sets the reader’s scanning behavior.
“Continuous” to decode the same barcode repeatedly or
decode different barcodes in a continuous motion.
“Level” for scanning by pressing the scan trigger.
Level