CipherLab CP55, Reference Manual

Page: 263 / 287

247
The tables below list the symbology settings for 1D laser scan engine (SE955) and 1D long
range laser scan engine (SE965HP).
SYMBOLOGY SETTINGS
Symbology Description Default
CODABAR
CodaBar
Codabar Checkbox to enable Codabar decoding. Enable
Length option Sets the length of the Codabar symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-
5
5; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
CLSI When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and tenth
characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
Disable
NOTIS Sets whether to include start/stop characters in the
transmitted data.
NOTIS Editing is to strip the start/stop characters, i.e. to
disable "Transmit Start/Stop Characters".
Disable
CODE 11
Code 11
Code 11 Checkbox to enable Code 11 decoding. Enable
Check Digit Option Sets whether to verify check digits according to the selected
option. If the check digits are incorrect, the barcode will not
be accepted.
Disable
One Check Digit
Two Check Digits
Disable
Transmit Check Digit Selects whether to include check digits in the transmitted
data.
Check Digit Option” must be enabled.
Disable
Length option Sets the length of the Code 11 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Max / Min
Length
(4-55)
Appendix III
LASER (SE955 & SE965HP)