CipherLab CP55 Reference Manual Download Page 119

Page: 119 / 287

103

Chapter 4 Operating System

Reports customer feedback to Microsoft for improving Windows Embedded Handheld

software.

Opens the reminder for an alarm or appointment.

Bluetooth A2DP profile in use. Tap it to access Bluetooth devices list.

Checks a new e-mail.

Opens Text application.

Roaming on

RESPOND TO NOTIFICATIONS

Tap Title bar to open Drop-down bar.

Drop-down bar opens.

Tap the status/notification icon to manage.

Drop-down bar closes and you are taken to the application in question.

CLEAR NOTIFICATIONS

A notification won’t be cleared until it is managed. Upon receiving a notification, tap Title bar

to open Drop-down bar to manage it, or tap the action command which appears on the
softkey bar.

Summary of Contents for CP55
































































































































































































































































































Search results

Summary of Contents for CP55

Reviews:

Related manuals for CP55

Brands by name

Popular brands

CipherLab CP55, Reference Manual

Search results

Summary of Contents for CP55

Reviews:

Related manuals for CP55

Brands by name

Popular brands