Chrysler 1997 Stratus Convertible LHD, Service Manual, Page: 826 / 1196

ENGINE SPECIFICATIONS (CONT.)
Description Standard Dimension Service Limit
Piston
O.D. 83.5 mm
(3.29 inches) —
Piston to Cylinder Clearance 0.02 to 0.04 mm
(0.0008 to 0.0016 inch) —
Ring End Gap
No. 1 0.25 to 0.40 mm
(.010 to .016 inch) 0.8 mm
(.031 inch)
No. 2 0.40 to 0.55 mm
(.016 to .022 inch) 0.8 mm
(.031 inch)
Oil 0.15 to 0.50 mm
(.006 to .019 inch) 1.0 mm
(.039 inch)
Ring Side Clearance No. 1 0.030 to 0.07 mm
(.0012 to .0028 inch) 0.1 mm
(.004 inch)
No. 2 (0.002 to 0.06 mm
(.0007 to .0024 inch) 0.1 mm
(.004 inch)
Connecting Rod
Length — Center to Center 140.9 to 141.0 mm
(5.547 to 5.551 inches) —
Parallelism — Twist 0.05 mm
(0.0019 inch) —
Torsion 0.1 mm
(0.0039 inch) —
Big End Thrust Clearance 0.10 to 0.25 mm
(0.004 to 0.010 inch) 0.4 mm
(0.016 inch)
Crankshaft
End Play 0.05 to 0.25 mm
(0.002 to 0.010 inch) 0.4 mm
(0.016 inch)
Main Journal Diameter 60.000 mm
(2.362 inches) —
Pin Diameter 50.000 mm
(1.969 inches) —
Bearing Surface Out-of-Round 0.03 mm Max.
(0.001 inch) Max. —
Bearing Surface Taper 0.005 mm Max.
(0.0002 inch) Max. —
Bearing Oil Clearance 0.02 to 0.04 mm
(0.0008 to 0.0016 inch) —
Undersize Service Bearing 0.25 to 0.50 - 0.75 mm
(0.010 to 0.020 - 0.030 inch) —
Cylinder Block
I.D. (Bore) 83.50 to 83.53 mm
(3.29 inches) —
Flatness of Top Surface 0.05 mm
(0.002 inch) 0.1 mm
(0.004 inch)
Grinding Limit of Top Surface 0.2 mm*
(0.008 inch) 0.2 mm*
(0.008 inch)
* Includes/Combined With Cylinder Head Grinding
Oil Pump
Relief Valve Opening Pressure 5.0 to 6.0 kg/cm
2
(71.45 to 85.76 psi)
—
Outer Rotor to Case Clearance 0.10 to 0.18 mm
(0.004 to 0.007 inch) 0.35 mm
(0.0138 inch)
Rotor End Clearance 0.06 to 0.18 mm
(0.0024 to 0.0071 inch) 0.09 mm
(0.0035 inch)
Inner Rotor Pilot to Case Clearance 0.03 to 0.07 mm
(0.001 to 0.0028 inch) 0.15 mm
(0.006 inch)
Minimum Pressure, Engine Fully Warmed Up at Idle 3000 RPM 41 kPa (6 psi)
241-517 kPa (35-75 psi)
9 - 90 2.5L ENGINE
JX
SPECIFICATIONS (Continued)