Power Supply Operation
3-17
The buttons used are the same as the ones when setting the DELAY time.
1. Press the
Menu
button.
2. Rotate the Knob to show MA/SL on the display.
3. Press the
Menu
button to confirm.
4. Rotate the Knob to show SETUP on the display.
5. Press the
Menu
button to confirm.
6. Rotate the Knob to show MODE on the display.
7. Press the
Menu
button to confirm.
8. Rotate the Knob to show NORMAL on the display.
9. Press the
Menu
button to finish the settings.
To quit the configuration, press any other key to exit.
●
TRACK
: Before enabling the track mode, you have to disable the output. When enabling
the track mode, the unit under the track mode will track the master’s voltage. This mode only
works in series connections. The procedures for setting the track mode are as follows:
The buttons used are the same as the ones when setting the DELAY time.
1. Press the
Menu
button.
2. Rotate the Knob to show MA/SL on the display.
3. Press the
Menu
button to confirm.
4. Rotate the Knob to show SETUP on the display.
5. Press the
Menu
button to confirm.
6. Rotate the Knob to show MODE on the display.
7. Press the
Menu
button to confirm.
8. Rotate the Knob to show TRACK on the display.
9. Press the
Menu
button to finish the settings.
To quit the configuration, press any other key to exit.
3.9
Turning Off the Output
The output of the power supply can be disabled or enabled through the front panel operation
or the remote operation. In addition, you can use the Lock/Local key to limit the output and
prevent inappropriate levels.
Front Panel Operation:
To turn on and off the output, press the
Output ON/OFF
button. When the output of the
power supply is disabled, the
OFF
symbol shows on the display. The voltage value is 0V
and the current value is 0.02A. When the output of the power supply is enabled, the
OFF
symbol disappears.
The output state is not able to be saved in the non-volatile memory. The default of the
output state is off when you turn on the power supply from the front panel or reset it
through the remote operation.
Remote Operation:
OUTP {OFF|ON}
Disable or enable the output.
Lock/Local Button
