Freeze-dryer Epsilon 1-4 LSCplus
Freeze-dryer Epsilon 2-4 LSCplus
6 Operation
80 / 152
Version 07/2022, Rev. 3.0 of 20/07/2022
• sb
Translation of the original operating manual
Product temperature sensor (see the illustration above, item B)
Only for systems with a WTMplus system
The wired product temperature sensor 1 is the default sensor for
determining the value "
ΔT product" (see chapter 6.6.3 - " Freeze-drying
with the PGMplus programmer module ", section "Conditions for switching
to the next section").
If the freeze-dryer is equipped with a wireless WTMplus temperature
measurement system, it is also possible to select a different wired product
temperature sensor or a WTMplus sensor:
• Select the button of the product temperature sensor. A drop-down menu
showing the available sensors opens.
• Select the sensor that you would like to use for determining "ΔT
product".
• Exit the drop-down menu. Select the button "Accept" to close the
dialogue box and to save the selection.
Fig. 48: Selection of the product temperature sensor (only for systems with a WTMplus
system)
