8-19
Setting of channel parameters for operation output channel
Refer to 8-3 Channel parameter setting, designate an output channel out of channels in and after CH037.
Select a channel in and after CH037 and press Enter key.
The following window opens to display the setting parameter entry screen.
In this setting parameter entry screen, settable items are input, unit, lower-limit of chart recording, higher-limit of
chart recording, tag, display skip, digital printing skip, and memory card recording skip only.
The cursor can move to other items, but setting cannot be done.
Select input setting parameters in and after CH037 from 2 kinds consisting of [Not used] and [Operation].
Select [Operation] when a channel is used as an operation output channel.
Copy of channel parameters for operation output channel
Set this item in the same way as in 8-3 Channel parameter setting.
Press Func2 key in the channel parameter setting screen to display the above CH setting copy screen.
The cursor moves to all items, but neither correction nor filter item can be set.
Copy the set values by the equivalent operation.
