2-2
Indications of the display section
Measuring data display
□□□ □□□ □□□□□□□ □□□□□□□□
：１
Measuring data display by 1 channel
Channel display: 3 digits
Range display: 3 digits
Measuring data display 7 digits
Tag No. display: 8 digits or
Digits unit display 8
※
5-digit display in case of collective
display of 36 points
The following six screens are selectable according to the uses during run.
(Described update cycles show the initial setting values at the delivery time from the factory.)
１．
Measuring data are fixed or sequentially displayed every channel.
These data are updated to the next channel by
▲
or
▼
key.
The above keys can be used for sequentially display.
In the sequential display mode, measuring data are updated to the
next channel at 2-second cycle.
Also, measured values display is updated every second.
４．
Measuring data at 36 points are displayed collectively.
(In case of the instruments where No. of input points is 36 points)
Skipped channels are kept blank. Each display area is not changed.
The same processing also applies to the channels where no range is
set. Measured values display is updated every second.
２．
Measuring data at 12 points are displayed collectively.
(In case of the instruments where No. of input points is 12 points.)
Skipped channels are kept blank. Each display area is not changed.
The same processing also applies to the channels where no range is
set. Measured values display is updated every second.
５．
Measuring data are fixed or sequentially displayed every 12 points.
(In case of the units where No. of input points is 24 points or 36 points).
These data are updated to the next 12 points by
▲
or
▼
key.
The above keys can be used for sequentially display.
In the sequential display mode, measuring data are updated to the
next 12 points at 3-second cycle.
Also, measured values display is updated every second.
３．
Measuring data at 24 points are displayed collectively.
(In case of the instruments where No. of input points is 24 points).
Skipped channels are kept blank. Each display area is not changed.
The same processing also applies to the channels where no range is
set. Measured values display is updated every second.
６．
Type code, serial No., software version number, IP address, and MAC
address of this unit are displayed.
In all screens, various status, chart speed, date (year, month, day), and time are always displayed at the upper part
of the display, while various setting procedures are always displayed at the lower part of the display.
