8-33
8-17-7 Setting of set value saving by PC card [PAR.SAVE]
①
Select PAR. SAVE.
②
Press Enter key to enter the parameter entry mode of a desired item
to be set.
A window opens and a save selection screen is displayed.
(For the save selection screen, refer to item
④
)
③
For stopping the save, the screen returns to the last one, each time
Esc key is pressed once.
④
Move the cursor to a desired setting No. by
▲・▼
keys.
The cursor does not move to any item other than No.
⑤
Select No. to be set and press Enter key.
A window opens and a setting parameter entry screen is displayed.
(For the setting parameter entry screen, refer to
⑥
)
⑥
Press Enter key and set a file name.
The file name can be input up to max. 8digits by alphanumeric
characters.
After the end of setting on this screen, bring the cursor to save .
※
After the end of setting of the file name, press Enter key. Then [file
name] is highlighted. Use
►
key and bring the cursor to save .
⑦
Terminate the setting (change or addition) by pressing Enter key.
If the set contents are not saved, press Esc key.
(Note 1)
When a file name is entered on the setting parameter entry screen,
the update date and time are developed automatically.
(Note 2)
A file name to be set cannot be set by the same file name even if its
No. is different.
(Note 3)
For entering a file name, no symbols other than alphanumeric
characters can be used.
Save?
Start
①
Esc key
NO
③
End
YES
Select No. by using
▲・▼
keys
④
②
Enter key
Enter key
Setting end
⑤
PAR.SAVE
Save?
NO
ＹＥＳ
Setting (change, addition)
by using
◄
•
►
keys,
alphanumeric keys
⑥
Enter key
Do you continue
setting?
Esc key
NO
⑦
YES
