8-27
8-14 Engineering port setting [ENG.]
Various parameter settings in this instrument are changed and set by computer if [PASS], which is sold
separately, is used. The computer and this instrument communicate by USB. In this case, setting USB address is
necessary. Setting of USB recognition address is written below (setting of factory delivery is [1]). Engineering port
(USB) is below the chassis front, so connect USB after opening the door (refer to 2-2. Front section of internal
unit).
1. Address setting of this unit
①
Select the setting display mode by pressing Menu key.
A window opens to display a setting items table.
②
Move the cursor by
◄
•
►
•
▲
•
▼
keys and select an item to be set.
③
Select ENG.
④
Enter the parameter entry mode of a desired item to be set by
pressing Enter key.
A window opens to display the setting parameter entry screen.
(For the setting parameter entry screen, refer to
⑥
.)
⑤
For stopping the setting, the screen returns to the last once,
each time Esc key is pressed once.
⑥
The cursor moves to a desired item to be set by
◄
•
►
•
▲
•
▼
keys.
The cursor moves to USB identification address
Set, each
time Enter key is pressed once.
This parameter input area adopts the setting parameter
selection system.
Select an address out of 1
to
5.
After the end of setting in this screen, bring the cursor to
Set .
⑦
Terminate the setting (change, addition) by pressing Enter key.
Start
Menu key
Set?
①
Esc key
NO
⑤
End
YES
Setting (change,
addition) by using
◄
•
►
•
▲
•
▼
keys, numeric
keys, etc.
⑥
Selection of setting items
by
◄
•
►
•
▲
•
▼
keys
②
Enter key
④
Setting parameter display
Setting end
⑦
ENG.
③