8-1
8. Setting and changes by key operation
8-1 Basic rules
This paragraph describes general common items in setting operation.
1. Setting items and setting parameters
In measurement and recording, versatile recording results and data are obtained according to various
conditions setting of this unit.
Measuring and recording conditions such as the range, speed, chart speed, etc are called setting items.
Individual definite contents of these setting items are called setting parameters or merely parameters.
2. Calling of setting items
All calling is started with Menu key. By pressing Menu key, various setting items are displayed. Select a setting
item by
◄
•
►
•
▲
•
▼
keys and define it by Enter key. Certain setting items are displayed over several
hierarchies.
3. Calling of setting parameters
When the items to be set are defined, a window opens to be ready for setting the setting parameters.
4. Acceptance and acceptance failure of keys
If the cursor does not move by
◄
•
►
•
▲
•
▼
keys or the parameter setting window is not opened by Enter key, it
is caused by an acceptance failure. Check if these keys are pressed securely.
5. No. of parameters by setting items
Number of setting parameters depends upon the setting items. One parameter is provided for time and chart
speed, while several parameters requiring the designation of channels are provided for ranges, scales, and
alarms.
6. Confirmation of setting parameters
Setting parameters can be set in two ways. One is the list printing to confirm all setting items or designated
setting items by printing them, while the other is the display confirmation to confirm the setting parameters by
calling them to the display section. The
[Display confirmation]
method will be described here.
For the [List printing], refer to 8-9.
When plural setting parameters are called, the preset lowest channel number is displayed.
After designating the channel number to be confirmed, press Enter key, and parameters of the channel are
displayed.
For confirming the other channel, return to the last screen by Esc key, select the channel by
◄
•
►
•
▲
•
▼
keys,
and press Enter key again to display the parameters of the channel.
If setting (change, addition) is not executed, irrespective of the number of setting parameters, press Esc key,
and the screen returns to the last one. Continue pressing Esc key until the mode returns to the normal display
mode.
Read these rules without fail before starting setting
Setting parameter
confirmation
Display confirmation
List printing
All items list
Designated items list
