Chino AL3000 SERIES, Instructions Manual

Page: 28 / 116

5-3
5.2. Cassette Ribbon Installation
1. Preparation
1) Move the printer to the center.
○
1
Turn on the power supply.
○
2
After initial operation, measured values are
displayed.
○
3
When the RECORD ON does not illuminate, it
shows that the printer stops at about the
center.
○
4
If the RECORD ON illuminates, press
keys not to illuminate. The
printer stops at about the center.
2)
Cassette ribbon
2. Mounting
1) Open the display board
After opening the door, open the display board to
the left.
The above figure shows without cassette ribbon
loaded for the first installation.
2) Insertion of cassette ribbon
○
1
Insert the cassette ribbon into the left holder.
○
2
Push the right side of the cassette ribbon so
that the ink ribbon is inserted to the lower side
of the printer.
○
3
Insert the right side of cassette ribbon into the
right holder.
○
4
Make sure that the cassette ribbon is securely
inserted into the claws of the right and left
holders.
○
5
Turn the ribbon winding knob lightly
counterclockwise.
○
6
Reset the display board as before.
3) Ink ribbon feeding check
○
1
By pressing keys,
the RECORD ON illuminates and the ink
ribbon feeds several centimeters.
○
2
Press keys several times.
The ink ribbon feeds several centimeters when
the RECORD ON illuminates.
Winding knob
Ink ribbon
Drive gear
Right side
Left side
Ink ribbon feeding direction
Display board
Cassette ribbon
Holder Winding knob Holder
Ink ribbon Printer