Chino AL3000 SERIES, Instructions Manual

Page: 96 / 116

17-2
17.2. Printer Test
The printer can be tested.
1. Test Printing
2. Test flow chart
Operation screen
     
     
   
   
   
Started with digital printing (red)
(Display returns to CHK1 display after end.)
(Note) After loading the chart, turn on
printing.
*[Display] key is not acceptable during
the execution of test.
Digital printing
Purple
Brown
Green
Blue
Black
Red
Trace printing
[Engineering mode]
Check
Cursor
Longer
than 3sec
[Selecting check]
[To CHK1 display]



Cursor
Cursor
Printer
[Selecting Printer]

[To test display]

Longer
than
2sec
( + )
Cursor
*
(Note)
[Test execution]
Remarks
1. Digital printing
･
40 characters (repetition of A to Z, 1 to
9,0) are printed on one line.
･
Same characters are printed in 6 lines.
･
Each line is printed in the order of trace
printing colors.
2. Trace printing
･
Trace printing is done by 11 rows at
intervals of 10% within a range of about
0% to 100%.
･
Chart is fed 0.1 mm once every line (11
dots).
･
Trace printing is done in the order of
trace printing colors every 1 lines.
･
Trace printing is executed by 6 lines in
total.
Test printing contents
It takes about 7 minutes to complete all
printings. For stopping printing halfway,
press keys.
The display returns to CHK1 display after
the end of one line.
For stopping the test
Remarks