Chino AL3000 SERIES, Instructions Manual

Page: 101 / 116

19-1
19. MAINTENANCE/TROUBLESHOOTING
19.1. Routine Inspection
Check the residual quantity of chart, printing conditions, etc., and use the instrument under a good
condition at all times.
1. Consumable parts check
Check items Checking methods
1. Residual
quantity of
chart
Check the residual quantity of chart. When the
residual quantity becomes less than 60 cm, a message
"Prepare the new chart" appears on the right side.
If it becomes less than 20 cm, an end mark appears.
Replace the chart with a new chart.
Loading of chart See par. 5.1.
Ordering of chart See par. 1.2.
2. Cassette
ribbon
Replace the cassette ribbon when the printings have become thin.
The cassette ribbon can be used for about 3 months under the reference environment.
See par. 5.2.
Loading of cassette ribbon See par. 5.2.
Ordering of cassette ribbon See par. 1.2.
2. Operation check
Check items Check contents
Printing
conditions
1. Feed condition of chart
Check if chart is fed normally.
2. Printing condition
Check if printings are normal.
Display
conditions
Check if displays of measured values, bargraph, and status are normal.
Others
○
1
Check if measured values are normal.
○
2
Check the instrument for abnormal noises, abnormal odor, or other abnormal
symptoms.
If a trouble was detected as a result of operation check, take remedial measures, referring to troubleshooting
in par.19.4.
Chart speed Continuous printing days of chart
10 mm/h About 40 days
20 mm/h About 20 days
40 mm/h About 10 days
Continuous printing days of chart
Reference