Chino AL3000 SERIES, Instructions Manual

Page: 37 / 116

7-4
For [communications] and [communications port], refer to the separate instruction manual for
[communications interface]
(Note) + :Press these keys after pressing key (temporary storing) every channel. (Alarm
point for Alarm output)
Parameters Programming items Defaults Programming ranges Entry (Note)
Format selection Sd
Select Ar out of Sd (standard),
Ar ,SP, and PL
+
Channel
1 to n,
n: Number of channels = 6
Zero of No.1 range
a (Lower-limit value
≦
a<b)
Span of No. 1 range b(a<b<c)
Span of No. 2 range c(b<c<d)
Span of No. 3 range d(c<d<e)
Span of No. 4 range e(d<e
≦
f)
Automatic
range
-shift(Ar)
(Max. 5
ranges)
Span of No. 5 range
Not
programmed
f(e<f
≦
Higher-limit value)
+
Format selection Sd
Select SP out of Sd (standard),
Ar ,SP, and PL
Channel
1 to n,
n: Number of channels = 6
Printing position at
No. 1 broken point
0 to a (%)
Printing position at
No. 2 broken point
a to 100 (%)
Scale value at 0%
position
b (Lower-limit value
≦
b<c)
Scale value at No.1
broken point
c(b<c<d)
Scale value at No.2
broken point
d(c<d<e)
Compressed/
expanded
printing (SP)
Scale value at 100%
position
Not
programmed
e(d<e
≦
Higher-limit value)
+
Format selection Sd
Select PL out of Sd (standard),
Ar,P, and PL
Channel of
No. 1 area A desired channel
out of 1 to n
Printing
format
Zone printing
(PL)
Channel of
No. 2 area
Not
programmed Channel other
than specified
above
n: Number
of
channels
= 6
+
High-speed
trace-printing
- 5 (sec)
Standard (5 sec/point),
High speed (2.5 sec/point)