Chino AL3000 SERIES, Instructions Manual

Page: 48 / 116

9-1
9. PRINTINGS
9.1. Printings
Printing comprises trace printing and digital printing. Trace printing, channel number printing, and
fixed-time printing are carried out even if no programming is done.
Printings Printing contents Remarks
Trace printing
(Dot-printing)
Trace printing is executed by dot-printing by colors every
channel. The following table shows channel colors.
CH.1 CH.2 CH.3 CH.4 CH.5 CH.6
Red Black Blue Green Brown Purple
Channel
number printing
Channel number is printed every fixed-time beside trace
printing
For the printing cycle,
refer to par. 10.1.
Fixed-time
printing
The following printing is executed every fixed-time.
○
1
Time line,
○
2
Time,
○
3
Chart speed,
○
4
Tag, engineering
unit, scale
○
5
Year, month, day
For the printing cycle,
refer to par. 10. 1
Digital data
printing
Data (measured values) at the requested time are
printed by interrupting trace printing.
Refer to par. 9.2.
List printing
Various programmed parameters are printed in the
format of a table.
Refer to par. 9.3.
Periodic data
printing
Data (measured values) are printed on trace printing at
programmed intervals.
Programming [periodic
data printing]. Refer to
par. 11.7.
Alarm printing Time, alarm points, etc. are printed when an alarm is on
or reset.
Refer to par. 10.4.
Programming
change mark
printing
Mark is printed when the parameter is changed
and stored.
Key operation for
[storing]
Digital pri
nti
ng
Power-on
printing
Year/month.day/time is printed only when power supply
is turned on.
When the power supply
is turned on.
An example of trace printing and fixed-time printing
+