Chino AL3000 SERIES, Instructions Manual

Page: 82 / 116

14-2
3. Programming flow chart
<Example> Programming channel 6 to the example on the left page
Operation screen
    
    

 
  
    
    
Temporary stored
 
Programming
other channel ?
Stored
After programming the span, press
[ENTRY] key, and the range number
advances up to 4.
For unnecessary numbers, press
[ENTRY] key to advance the range
number up to 4.
Programming in and
after No.2 range
Remarks 2
Scale is printed in the order of channels.
Range numbers (R1 to R4) are also
printed.
Printings
Reference 5
Press a key other than key and
reset. Display transfers to the next one,
if normal.
Remedial measure
to error display
Remarks 1
For other channels, repeat the same procedure form [channel selection].
Other channel programming
＋
Cursor
Channel
Automatic range-shift
Channel
(1)

[Printing format check]
Standard

[For programming
condition]

[Selecting
automatic range-shift]

[Channel selection]
YES
NO

[Programming channel]
Channel

[Programming zero
of No.1 range]
No.1 range

[Programming span
of No.1 range]
Zero
*
Cursor
Span
*

+
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Reference 1
Numeric keys
Remarks 1
Remarks 1
Remarks 1
Numeric keys
Remarks 2
Reference 2
The check display appears when
pressing [ENTRY] key. The
programmed parameters are displayed
sequentially each time [ENTRY] key is
pressed.
The channel is shifted to the other
channels by or key.
Programming parameters Reference 1
Programmed are stored into memory.
(Programming change mark is printed.)
Storing
Reference 2
For canceling the stored parameters,
clear it by pressing ( + )
keys in the display in step
○
4
to
○
7
,
and store by pressing [ENTRY] key.
Cancellation of programming
Reference 3
Shift the cursor to (

) in step
○
2
,
and press [ENTRY] key.
For reprogramming to the automatic
range-shift again, perform step
○
1
to
○
3
and execute [storing].
Method of reprogramming
to standard printing
Reference 4