Chino AL3000 SERIES, Instructions Manual

Page: 50 / 116

9-3
9.3. List Printing
Programmed parameters of [range/printing
range], [scale], [chart speed], etc. can be printed,
but trace printing is interrupted.
Operation screen
List printing
(Printing time Approx. 15 minutes)
Interrupt?
End of list printing
○
1
Press keys.
Trace printing is interrupted. Chart is fed
slightly and list printing is started.
○
2
After the end, the chart is fed a little, and the
instrument returns to the condition before
execution.
○
3
For interrupting the operation,
press keys and turn on the
printing by pressing keys again.
○
4
Printing color is black. The programmed
parameters of each channel are printed with
the same colors as in trace printing.
+
Remarks 2
YES
NO
○
1
RECORD ON
status disappears.
○
2
KEY LOCK
status illuminates.
List printing cannot be executed
in the following cases.
Remarks 1
Operation….Measurement and alarm
operation are continued without
being interrupted.
Reference
+
Remarks 2
YES
NO
+
○
1
Year/month, day/hour/minute
○
2
Chart speed
○
3
Range of each channel (Input type,
measuring range, whether reference
junction compensation enabled or disabled
(inside/outside), printing range)
○
4
Scale, engineering unit, and tag in each
channel*
○
5
Periodic data printing (interval, start time)
○
6
Printing format
○
7
Alarms
*These parameters are not printed if they are
not programmed.
List printing
An example of list printing
○
1
By pressing + key,
 
is displayed for about
5 seconds. Data are printed by pressing
key during this display time.
○
2
If key is not pressed during this display
time, data are not printed.
Press + keys again.
List printing is executed by
pressing key.
Remarks 2