- 33 -
3. Switching of display
The unit can provide seven display modes depending on the number of inputs.
On 1-point display, 1-point
+ bar display, 2-point display and 2-point + bar display,
either fixed or sequential display
can be selected for each display mode (pressing the key switches the display between AUTO: sequential
and CONST: fixed).
With the sequential display, channel number advances every two seconds (factory default which can be changed).
While holding down the
key, press the
/
key to change the display mode.
See “8-23. Display Settings” to set default display mode at power-on.
CHNo. Measured value.
Chart end/recording ON.
Data print/list print.
AUTO/CONST. Key lock. POC.
SD card remaining amount
CHNo. Measured value. TAG.
Unit.
Chart end/recording ON.
Data print/list print
AUTO/CONST Key lock.
POC
SD card remaining amount.
CHNo. Measured value. TAG.
Unit.
Chart end/recording ON.
Data print/list print
Date/time. Chart speed
AUTO/CONST Key lock.
POC
Recoding point indicator
SD card remaining amount.
Key guide.
CHNo. Measured value.
Chart end/recording ON.
Data print/list print
Key lock. POC
SD card remaining amount.
CHNo. Measured value. TAG or Unit.
Chart end/recording ON.
Data print/list print
Time. Chart
speed
Key lock.
POC
Recoding point indicator
SD card remaining amount.
Key guide.
Pointer (CHNo.) Measured
value.
Chart end/recording ON.
Data print/list print
Key lock. POC
SD card remaining amount.
Time.
↓
: ESC +
▲
↑
: E SC +
▼
To switch from “1-point display” to “1-point + bar display”, press the key while holding down the key.
To switch from “1-point display” to “Pointer display”, press the key while holding down the key.
CHNo. Measured value. TAG.
Unit.
Chart end/recording ON.
Data print/list print
Date/time. Chart speed
AUTO/CONST Key lock.
POC
Recoding point indicator
SD card remaining amount. Key guide.
1-point + bar display
2-point display
2-point + bar display
4 (3)-point display
1-point display
4 (3)-point + bar display
Pointer display
