- 98 -
3. Parameter settings
(1) Pressing
the
key displays the
menu window (list of setting items).
(2) Select
“System”.
(3) Pressing
the
key opens the
password entry window.
(4) Enter a password. After that, move the
cursor to Set and press the
key.
(5) When password entry is completed, move
the cursor to Set and press the
key.
(6) Move the cursor to the parameter to be set
with the
▲
/
▼
/ /
keys.
(7) For enabling and disabling, press the
key and check
the desired item.
For the other parameters, press
to
set, then select a value or input.
(8) After completing the settings of this item,
move the cursor to Set .
(9) Press
the
key to register the
settings (when chart recording is ON, a
setting change mark is printed). To cancel
the settings, press the
key.
Press the
key to display “***Start
Initializing?***” then press
key to
execute memory clear.
To cancel the settings, press the
key.
[System setting parameters]
Parameter
Function
Default
Set value
Key Lock
Set disabling settings change by key.
Not set
Select at checkbox.
Initialize
Set memory clear.
Not set
Select at checkbox.
[Rec Adj]
：
Adjust of Rec position
Disable/enable zero or span
adjustment for printing position.
Not set
Select at checkbox.
[Inp Adj]
：
Input Correction
Disable/enable input adjustment.
Not set
Select at checkbox.
Frequency of power
Set power frequency.
50Hz
50Hz
，
60Hz
Relay mode
Set alarm output mode.
Norm.Open
Norm.Open (non-excitation),
Norm.Close (excitation)
Filter (Preamp)
Set strength of the filter.
0
0 to 10
Note: Actual windows are separated. Use the
▲
/
▼
keys to
scroll and continue settings.
