- 38 -
2. Fixed time printing interval
When recording is ON at the time of power-on, fixed time printing is performed first.
The following table shows printing intervals which vary depending on the printing item.
Time and time line
Chart speed
Min/max chart record, channel number and
tag and unit
Varies depending on
the chart speed
At approximately 84mm
intervals
At intervals of 42mm and in order of channel
number.
1) Printing intervals of time and time line
Time and time line are printed at the following intervals which vary by the chart speed. The start point of the
intervals is 00h 00min.
Chart speed (mm/H)
Time and time line
Time line only
Year/month/date
1 - 9
12h 00min only
6h
00h 00min only
10 - 15
4h
2h
16 - 30
2h
1h
31 - 60
1h
←
61 – 119
1h
30min
120 - 149
30min
←
150 or higher
No printing
30min
Example:
(1) Time line
(2) Time
(3) POC mark (print only when time axis synchronization is ON
)
)
2) Printing interval of max/min chart record, channels number and tag and unit
(1) These are printed
at intervals of 42mm and in order of channel number.
(2) Tag is not printed if not specified.
(3) When you set the recording format, printing contents vary depending on the selected format.
(4) Printing mode is different depending on the chart speed.
Standard (Standard), automatic range-shift (Auto Range)
Note: When Auto Range is used, the max/min chart record of the range (one of the ranges R1 to R5) used at
the time of printing will be printed.
Compressed/expanded printing (Comp. & Exp.Print)
Zone printing (Zone Print)
+ + …*
1: TIC1
0.0/200.0/400.0/500.0°C
zero/1st break point/2nd break point/span
+ + …*
1: TIC1
0.0/500.0°C
* A “+” mark is printed at the first and second break
points.
* A “+” mark is printed at the edge of the printing area
to indicate it.
Tag
Channel No.
Min/max chart record
Unit
Trace printing
1: TIC1
0.0/500.0
°
C
