- 82 -
* Make sure that the recording format is set to “Zone Print (zone printing)” and then perform the following settings.
(1) Pressing
the
key displays the
menu window (list of setting items).
(2) Select
“ZonePrt”.
(3) Press
the
key.
(4) Move the cursor to the parameter to be set
with the
▲
/
▼
/
/
keys.
(5) Press
the
key to make it available
for setting and then select or enter a value.
(6) After completing the settings of this item,
move the cursor to Set .
(7) Press
the
key to register the
settings (when chart recording is ON, a
setting change mark is printed). To cancel
the settings, press the
key.
[List of Zoneprt setting parameters]
Parameter
Function
Default
Set value
Zone
Set number of divisions for
zone printing
2
2 to 4
Type
Area specification format
Selected from options
CH.X
CH.X, CH.X/CH.Y, CH.X - CH.Y, CH.X/CH.Y/CH.Z,
CH.X - CH.Y/CH.Z, CH.X/CH.Y - CH.Z
CH.X
-
- (Not used), 1 to 4
CH.Y
*
- (Not used), 1 to 4
CH.Z
*
- (Not used), 1 to 4
Note: Actual windows are separated. Use the
▲
/
▼
keys to
scroll and continue settings.
The number of areas increases as you select a greater
number for division (Zone), resulting in the need of
setting more parameters.
(CH.X) ········································· Record CH.X to the specified area.
(CH.X)/(CH.Y) ······························· Record CH.X and CH.Y to the specified area.
(CH.X) - (CH.Y) ····························· Record CH.X - CH.Y to the specified area.
(CH.X)/(CH.Y)/(CH.Z) ····················· Record CH.X, CH.Y and CH.Z to the specified area.
(CH.X) - (CH.Y)/(CH.Z) ···················· Record CH.X - CH.Y and CH.Z to the specified area.
(CH.X)/(CH.Y) - (CH.Z) ···················· Record CH.X and CH.Y - CH.Z to the specified area.
Area specification (Type)
Reference
A channel not selected for any area will be skipped.
An error occurs when the same channel is set for multiple areas.
CH selection
Note
