20 / 39
FISIOLASER IRD/IRD 2
PROBE
Rotate the encoder knob until to position the cursor on the PROBE menu , then press
the encoder knob for to confirm the choice ; it appears the next screen ( see
Fig.11) :
Fig. 11
In correspondence of this screen is possible :
To select the emission modality of the treatment among those available (
manual , automatic , continuous )
To select the laser probe that you want to use for the emission of the
treatment
To select the treatment area for everyone of the laser probe used
At the end of the setting phase , you can save the desired settings pushing the
function taste relative to the SAVE button ; it appears to video “Settings saved !”
message , that it confirms the correct saving of the settings see fig. 12) :
Fig. 12
Otherwise , pushing the function taste relative to the CANCEL button , the setting is
aborted ; you return to the screen of fig. 9 .
When you have saved the setting :
Press the function taste relative to the EXIT button ; you return to the screen
of fig. 4
Press the function taste relative to the FREE PROCEDURE button ( see fig.
4 ) ; it appears to video the next screen ( see fig. 13 ) :
Fig. 13
Press the START button : as default , the device runs the emission with the
modality saved in the last session .
It’s possible to select the next modalities for the emission of the treatment :
“Manual” emission modality
“Automatic” emission modality
Save
Cancel
Save
Cancel
Channel 2
Exit
CHANNEL 1
MLA 1/25 Personalized
00:00
CHANNEL 2
00:00
* * CHANNEL <1> * *
