30 / 39
FISIOLASER IRD/IRD 2
YOU MUST
turn off the equipment with the power switch
at the back and unplug the socket connected to the
mains before carrying out any maintenance or cleaning.
When cleaning the outer part of the equipment, make sure to use a soft, clean cloth
dampened with luke-warm water or very mild non inflammable detergents.
The front panel can be cleaned in the same way .
Do not place on the equipment any objects that can produce heat or that contains
water or other liquids .
Do not place the equipment in proximity of other equipment that can produce
electric , magnetic or electro-magnetic fields with high intensity (equipment for
diathermy, for X-rays, etc.) .
The laser probes, particularly the head of treatment, periodically should be cleaned
with water and denatured alcohol .
Store with care the laser probes at the conclusion of every treatment .
Contact authorised dealers of CHINESPORT SpA for information regarding
original spare parts or components .
CAUTION
Use with care the probe-applicator : a bad
manipulation can influence negatively
its performances and characteristics .
CAUTION
The operator should be reminded to perform regular checks on the functioning of the
cylinders/applicators, and especially :
o
check the cylinder surface for any cracks that could affect the insulation of the
internal conductors;
o
check the condition of the cable and the cylinder / applicator connector
CAUTION
In no circumstances should anybody that is not authorised by CHINESPORT SpA
open or disassemble the laser probes: in addition to damaging the accessory, this
tampering will cause the warranty to immediately lapse.
CAUTION
When cleaning the outer part of the equipment,
do not use diluents, detergents, acid solutions, abrasive
or aggressive solutions, or inflammable substances.
Use of any of the above mentioned substances or improper use of the accessories
will cause
irreparable damage to the equipment and
the guarantee will be no longer valid.
Do not spray or pour liquid onto the external parts of the FISIOLASER IRD-series
equipment and onto the laser-probes .
Do not immerse the unit in water .
After cleaning the external part of the equipment, make sure to dry it perfectly before
turning on the unit.
The unit must under no circumstances be opened or dismantled in order to clean or
check inner parts – FISIOLASER IRD-series equipment does not require cleaning of
inner parts and in all cases, only specialised technicians or CHINESPORT SpA
authorised personnel should carry out such operations
NOTE
For best use of the unit and in order to ensure its best
performance, we advise you to carry out regular maintenance as described.
CAUTION
Check the integrity of the cable set
and the cables connecting the handpiece/applicator
at frequent intervals : they should never
be damaged or display signs of wear and team.
