12 / 39
FISIOLASER IRD/IRD 2
The equipment WILL NOT WORK WITHOUT IT !
You can keep the safety contacts at a distance thanks to the socket.
You must use a 1-way micro-switch that is normally turned off, for the safety
interlock.
The safety key works by cutting off both the invisible laser emission, and the
Led targeting power in red
.
The Smart Card is supplied as an accessory, in order to save up personalized
programmes .
The device must be used exclusively with its smart-card .
! WARNING !
The two pointer-LED diodes , of red colour,
they delimit the action-area of the spot relative
to the laser emission ; use the spots of the
pointer-diodes as reference drive for the
revealing of the position of the spot of the laser beam .
LIGHTING OF THE DEVICE
! WARNING !
It is recommended not to start the emission of treatment
if the device isn’t in perfect mechanical conditions .
When the Unit is switched on, the LCD display lights up and FISIOLASER IRD-
series unit is ready for use .
The following will appear on the screen ( see fig .2 ) :
Fig. 2
Following that screen, another will be loaded in which the user is asked to enter an
access code.
This code has been set with the default number of 1234. Press the function buttons
near the number on the video to type it ( see fig. 3 ) :
Fig. 3
This code can not be modified by the user.
The first page will appear when you press the Encoder knob ( see Fig.4 ) .
You can choose from one of the four operating modes by pressing the appropriate
function key.
Insert code:
1
3
2
4
