23 / 39
FISIOLASER IRD/IRD 2
from the laser-probes for the emission of the
laser-therapy treatments is invisible , the probes
foresee on board the assemblage of
two diodes led, of red colour .
! WARNING !
The device of target pointing
of the probe supplied to the device
is characterized by two drive-lights
(led diodes), what they have a driving function ,
in conformity to the EN 60601-2-22 standard .
! WARNING !
The red led-diodes light on with the activation
of the laser emission from the operator,
and everyone of them they emits a pointer beam .
The pointer-beams produce some red spot on
the point of impact, and they delimit the region
where it will revert the spot of the laser beam ,
that is invisible to human eye.
The laser beam is always found to the centre
of the axis of symmetry of the two red spots .
VARIOUS
Rotate the encoder knob until to position the cursor on the VARIOUS menu , then
press the encoder knob for to confirm the choice ; it appears to video the next screen
(see fig. 18 ) :
Fig.18
It is possible to activate or deactivate the acoustic signal, using the “Buzzer ON”
check-box ; this action allows the appearing / disappearing of a check point to the
inner of the check-box ( see fig. 18 and fig. 19 ) :
Fig.19
The screens of fig. 18 and fig. 19 alternate it by pressing repeatedly the encoder ,
that allows to deactivate or activate respectively the buzzer .
The Smart-Card can be formatted .
All new cards that have never been previously used must be formatted.
You can also use the “Format Smart-card” function to delete it completely.
If you do this it can be used on a different unit. In order to avoid accidental deletion,
you are asked to confirm the operation
Save
Cancel
Save
Cancel
