Chima SVP309P, User Manual

Page: 37 / 56

SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: Support@stephen-tele.com / Url: www.stephen-tele.com
37
Suffix Set suffix, this is optional config item. It will show no suffix if you don’t set it.
Delete Length Set delete length. This is optional config item. For example: if the delete length is
3, the phone will delete the first 3 digits then send out the rest digits. You can
refer to examples of different alias application to know how to set delete length.
Introduction of how to set up dial-peer to implement switch between multi- SIP lines
9T mapping: If you have registered a SIP1 server and set dial-peer according to the above table
，
all calls will be
sent via SIP1 server when you press the numeric key “9” in front of dialing destination phone numbers.
8T mapping: If you have registered a Private SIP2 server and set dial-peer according to the above table
，
all calls will
be sent via SIP2 server when you press the numeric key “8” in front of dialing destination phone numbers.
the rule of 2T means user need to dial the number with prefix 2 if he want to dial via IAX2 server
Examples of different alias application
Set by web explanation example
You need set phone number, Destination, Alias and
Delete Length.
Phone number is XXXT, Destination is
255.255.255.255 and Alias is del.
This means any phone No. that starts with your set
phone number will be sent via SIP2 line after the
first several digits of your dialed phone number are
deleted according to delete length.
If you dial “93333”, the
SIP2 server will receive
“3333”
This setting will realize speed dial function, after
you dialing the numeric key “2”, the number after
all will be sent out.
When you dial “2”, the SIP1
server will receive
33334444