SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
23
LAN Config
Field name
explanation
LAN IP
Specify LAN static IP.
Netmask
Specify LAN Netmask.
DHCP Service
Select the DHCP server of LAN port or not. After user modify the LAN IP
address, phone will amend and adjust the DHCP Lease Table and save the
result amended automatically according to the IP address and Netmask. You
need restart the phone and the DHCP server setting will take effect.
NAT
Select NAT or not.
Bridge Mode
Select Bridge Mode or not: If you select Bridge Mode, the phone will no
longer set IP address for LAN physical port
，
LAN and WAN will join in the same
network.. Click “Apply”, the phone will reboot.
Notice: If you choose the bridge mode, the LAN configuration will be disabled.
4.3.2.3. Qos Config
The VOIP phone support 802.1Q/P protocol and DiffServ configuration. VLAN functionality can use different VLAN IDs by
setting signal/voice VLAN and data VLAN. The VLAN application of this phone is very flexible.
