SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
41
In order to keep some users' secondary dialing manner when dialing the external line with pbx, phone can be added a
special rule to realize it. so user can dial a number as external line prefix and get the secondary dial tone to keep dial the
external number. after finishing dialing, phone will send the prefix and external number totaly to ther server.
for example, there is a rule 9,xxxxxxxx in the digital map table. after dialing 9, phone will send the secondary dial tone,
user may keep going dialing. after finished, phone will call the number which starts with 9, actually the number sent out is
9-digit with 9.
Digital Map Configuration
Field name
explanation
End with "#"
Set Enable/Disable the phone ended with “#” dial.
Fixed Length
Specify the Fixed Length of phone ending with.
Time out
Set the timeout of the last dial digit. The call will be sent after timeout.
Below is user-defined digital map rule:
[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas, or a list of digits.
x Match any single digit that is dialed.
. Match any arbitrary number of digits including none.
Tn Indicates an additional time out period before digits are sent of n seconds in length. n is mandatory and can
have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dial plan. If Tn is not specified it is assumed to
be T0 by default on all dial plans.
[1-8]xxx: Cause extensions 1000-8999 to be dialed immediately
9xxxxxxx: Cause 8 digit numbers started with 9 to be dialed immediately
911: Cause 911 to be dialed immediately after it is entered.
