STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen,
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email:
the
key, the screen will display
If the icom “PPPoE” on the top of the screen keeps blink, it shows that the phone is trying to access the PPPoE server.,
and the IP is still static IP if you press
blink, it means that the phone has already gotten IP from PPPoE server.
2.2.2. Static IP mode:
1. Press the 1 key for three seconds, then confirm it by the
switch into Static IP mode. Prepare your phone’s network parameters. They are IP Address of this phone, Subnet Mask,
Default Gateway/ Router and DNS. You can ask your VoIP service provider for those parameters.
2. Press the
key, the LCD screen will display “INPUT PASSWORD”.
3. Input password (default is 123), then press the
4. Press the
key, and the LCD screen will display “LAN”. Press the
screen will display “STATIC NET”.
5. Press the
key, the LCD screen will display “IP”. Press the
your desired IP address for your IP phone and confirmed by pressing the
inputted IP address. When inputting IP with keypad, use “*” instead of “.”.
6. Press the
key to return to previous menu, then press the
Press the
key then the
key, and then the LCD will display the inputted DNS address.
7. Press the
key to return to previous menu, then press the
Press the
key then the
and then the LCD will display the inputted DNS address.
8. Press the
key to return to the previous menu, and then press the
“GATEWAY”. Press the
key again and th
pressing the
key, the LCD screen will display the inputted gateway address.
9. Press the
key to return to the previous menu, and then press the
SVP309P Office POE SIP Phone
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen,
/Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
ay “CHANGING”, which means that the phone is trying to switch to PPPoE mode.
If the icom “PPPoE” on the top of the screen keeps blink, it shows that the phone is trying to access the PPPoE server.,
key to display the current IP; if the icon “PPPoE” is showed without
blink, it means that the phone has already gotten IP from PPPoE server.
1. Press the 1 key for three seconds, then confirm it by the
key, your phone network connection mode will
switch into Static IP mode. Prepare your phone’s network parameters. They are IP Address of this phone, Subnet Mask,
Default Gateway/ Router and DNS. You can ask your VoIP service provider for those parameters.
key, the LCD screen will display “INPUT PASSWORD”.
3. Input password (default is 123), then press the
key, the LCD screen will display” NETWORK”.
key, and the LCD screen will display “LAN”. Press the
key, then the
key, the LCD screen will display “IP”. Press the
key again and then the
your desired IP address for your IP phone and confirmed by pressing the
key, then the LCD will display the
inputted IP address. When inputting IP with keypad, use “*” instead of “.”.
key to return to previous menu, then press the
key, the LCD screen will display “DNS2”.
key, input your spare DNS address and confirm it by pressing the
key, and then the LCD will display the inputted DNS address.
key to return to previous menu, then press the
key, the LCD screen will display “DNS”.
key, input your DNS address and confirm it by pressing the
and then the LCD will display the inputted DNS address.
key to return to the previous menu, and then press the
key, the LCD screen will display
key again and then the
key, input your gateway’s IP address and confirm it by
key, the LCD screen will display the inputted gateway address.
key to return to the previous menu, and then press the
key, the LCD screen will display
Office POE SIP Phone User Manual
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
tele.com
10
, which means that the phone is trying to switch to PPPoE mode.
If the icom “PPPoE” on the top of the screen keeps blink, it shows that the phone is trying to access the PPPoE server.,
y the current IP; if the icon “PPPoE” is showed without
key, your phone network connection mode will
switch into Static IP mode. Prepare your phone’s network parameters. They are IP Address of this phone, Subnet Mask,
Default Gateway/ Router and DNS. You can ask your VoIP service provider for those parameters.
key, the LCD screen will display” NETWORK”.
key, then the
key, the LCD
key again and then the
key, input
key, then the LCD will display the
key, the LCD screen will display “DNS2”.
our spare DNS address and confirm it by pressing the
key, the LCD screen will display “DNS”.
t your DNS address and confirm it by pressing the
key,
key, the LCD screen will display
key, input your gateway’s IP address and confirm it by
key, the LCD screen will display
