SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
31
Server Name
Set the server name.
Server Address
Input your SIP server address.
Server Port
Set your SIP server port.
Account Name
Input your SIP register account name.
Password
Input your SIP register password.
Phone Number
Input the phone number assigned by your VoIP service provider. Phone will not
register if there is no phone number configured.
Display Name
Set the display name.
Proxy Server Address
Set proxy server IP address
（
Usually, Register SIP Server configuration is the same
as Proxy SIP Server. But if your VoIP service provider give different configurations
between Register SIP Server and Proxy SIP Server, you need make different
settings.
）
Proxy Server Port
Set your Proxy SIP server port.
Proxy Username
Input your Proxy SIP server account.
Proxy Password
Input your Proxy SIP server password.
Domain Realm
Set the sip domain if needed, otherwise this VoIP phone will use the Register
server address as sip domain automatically. (Usually it is same with registered
server and proxy server IP address).
Enable Register
Start to register or not by selecting it or not.
Register Expire Time
Set expire time of SIP server register, default is 60 seconds. If the register time of
the server requested is longer or shorter than the expire time set, the phone will
change automatically the time into the time recommended by the server, and
register again.
NAT Keep Alive Interval
Set examining interval of the server, default is 60 seconds
User Agent
Set the user agent if have, the default is VoIP Phone 1.0
Signal Key
Set the key for signal encryption
Media Key
Set the key for RTP encryption
Local port
Set sip port of each line
Ring type
Set ring type of each line
Hot line Number
Set Hot line number of each line.
Transfer Expire Time
The phone send bye and end the call as soon as hang up.
Enable Subscribe
Enable Subscribe.
Enable Keep Authentication
Enable/Disable Keep Authentication.
NAT Keep Alive
Enable/Disable keeps NAT of SIP alive.
If some server refuse to register with too short interval time, and has no packets
sending to device in private network to keep NAT alive, user could set this
function ON. It need set the keep alive interval time less than the NAT server’s.
Enable Via rport
Enable/Disable system to support RFC3581. Via rport is special way to realize SIP
NAT.
Enable PRACK
Enable or disable SIP PRACK function, suggest use the default config.
Long Contact
Set more parameters in contact field; connection with SEM server
Enable URI Convert
Convert # to %23 when send the URI.
Dial Without Register
Set call out by proxy without registration;
Ban Anonymous Call
Set to ban Anonymous Call;
