SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
36
DIAL PEER
Field name
explanation
Phone number
There are two types of matching conditions: one is full matching, the other is
prefix matching. In the Full matching, you need input your desired phone number
in this blank, and then you need dial the phone number to realize calling to what
the phone number is mapped. In the prefix matching, you need input your
desired prefix number and T; then dial the prefix and a phone number to realize
calling to what your prefix number is mapped. The prefix number supports at
most 30 digits
Destination
Set Destination address. This is optional config item. If you want to set peer to
peer call, please input destination IP address or domain name. If you want to use
this dial rule in SIP2 line, you need input 255.255.255.255 or 0.0.0.2 in it.
Port
Set the Signal port, the default is 5060 for SIP.
Alias
Set alias. This is optional config item. If you don’t set Alias, it will show no alias.
Note: There are four types of aliases.
1) add: xxx, it means that you need dial xxx in front of phone number, which will reduce dialing number length.
2) all: xxx, it means that xxx will replace some phone number.
3) del: It means that phone will delete the number with length appointed.
4) Rep: It means that phone will replace the number with length and number appointed.
You can refer to the following examples of different alias application to know more how to use different aliases
and this dial rule.
Call Mode
Select differenct signal protocol, SIP or IAX2
