SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
25
Voice/Data VLAN
differentiated
After enable VLAN, system will set packets with different type of VLAN ID.
Undifferentiated means after using VLAN, both VoIP packets and other data
packets will use the voice VLAN ID; tag differentiated means after using VLAN,
VoIP(signal and voice) packets will add voice VLAN ID, and other data packets will
add data VLAN ID; data untaged means after using VLAN, only VoIP packets will
add voice VLAN ID. Other data packets will not use VLAN.
DiffServ Enable
Select it or not to Enable or disable DiffServ.
DiffServ Value
Set DiffServ value, the common value is 0x00.
Voice 802.1P Priority
Specify 802.1P Priority of voice/signal data package.
Data 802.1P Priority
Set 802.1p of data VLAN. Non-VoIP data (such as http, telnet, ping etc) will use
this value to set VLAN package.
Voice VLAN ID
Set VLAN ID of voice/signal data package.
Data VLAN ID
Set 802.1q of data VLAN ID. Non-VoIP data (such as http, telnet, ping etc) will use
this value to set VLAN package.
NOTICE
：
1
）
Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will use the Voice VLAN ID
as the tag.
2) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disable the DiffServ, then system
will not distinguish the voice and data, all packets will use the Voice VLAN ID as the tag.
3) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and enable the DiffServ, then system
will distinguish the voice and data and add the VLAN ID each other.
4) Startup VLAN, if set Voice/Data VLAN differentiated as data untaged, then the packet of the signal/voice will
use the Voice VLAN ID as the tag, but the data packets will not take the VLAN tag.
5) If Disable the VLAN, regardless to set the Voice/Data VLAN differentiated or not, all packets will not take the
VLAN tag; If enable the DiffServ, all packets will only take the DiffServ value.
6) user need notice, enable the VLAN ID Check Enable that is default, If enable it, the phone will match the VLAN
ID strictly. When others' VLAN ID dismatch with us, the packets will discard. Contrarily, the phone will accept
the packets with the distinct VLAN ID.
7) You must gain the IP with the Static mode when you set VLAN, otherwise can't gain the IP in the VLAN and also
can not dial with point to point.
4.3.2.4. Service Port
You can set the port of telnet/HTTP/RTP by this page.
