SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
35
STUN Server Port
Set your SIP STUN Server Port
STUN Effect Time
Set STUN Effective Time. If NAT server finds that a NAT mapping is idle after time out, it will
release the mapping and the system need send a STUN packet to keep the mapping effective
and alive.
Local SIP Port
Set the SIP port.
Choose line to set info about SIP, There are 2 lines to choose. You can switch by
【
【
【
【
Load
】
】
】
】
button.
Use Stun
Enable/Disable SIP STUN.
Notice:
SIP STUN is used to realize SIP penetration to NAT. If your phone configures STUN Server IP and Port (default is
3478), and enable SIP Stun, you can use the ordinary SIP Server to realize penetration to NAT.
4.3.3.4. DIAL PEER setting
This functionality offers you more flexible dial rule, you can refer to the following content to know how to use this dial rule.
When you want to dial an IP address, the entry of IP addresses is very cumbersome, but by this functionality, you can set
number 156 to replace 192.168.1.119 here.
When you want to dial a long distance call to Beijing, you need dial an area code 010 before local phone number, but you
can also dial number 1 instead of 010 after we make a setting according to this dial rule. For example, you want to dial
01062213123, but you need dial only 162213123 to realize your long distance call after you make this setting.
To save the memory and avoid abundant input of user,add the follow fuctions:
1
、
x Match any single digit that is dialed.
If user makes the above configuration, after user dials 11 digit numbers started with 13, the phone will send out 0 plus the
dialed numbers automatically.
2
、
[] Specifies a range that will match digit. It may be a range, a list of ranges separated by commas, or a list of digits.
If user makes the above configuration, after user dials 11 digit numbers started with from 135 to 139, the phone will send
out 0 plus the dialed numbers automatically.
Use this phone you can realize dialing out via different lines without switch in web interface.
