SVP309P Office POE SIP Phone User Manual
STEPHEN TECHNOLOGIES CO.,LIMITED
/ 5/F, Building NO.1, TongXin Industry Zone, HengGang, LongGang, Shenzhen, G.D, China, 518115
Tel: +86 755 89352606 /Fax:+86 755 89352612 / Email: [email protected] / Url: www.stephen-tele.com
15
MWI(Message Waiting Indication)
When a new voicemail coming, LED on the phone will flash. You can press the
MWI
key to listen new voicemail if you
configure mwi number
3.2.2. Call pickup
Call pickup is implemented by simulating pickup function of PBX. it’s that, when A calls B, B rings but no answer, at this
moment, C can hook off and input an appointed prefix plus B’s number, pick up A’s call and talk with A
The following chart shows how to configure an appointed prefix in dial peer to have call pick up function.
*1* means appointed prefix code. After making the above configuration, C can dial *1* plus B’phone number to pick up
A’s call. User can set prefix in random, in the case of no affecting current dialing rules.
3.2.3. join call
When B is calling C, A can join in the existing call by inputing an appointed prefix numbers plus B or C number, if B or C
also supports join call
The following chart shows how to configure an appointed prefix in dialpeer to have join call function.
*2* means appointed prefix code. After making the above configuration, A can dial *2* plus B or C number to join B and
C’s call, . User can set prefix in random, in the case of no affecting current dialing rules.
3.2.4. redial/unredial
If B is in busy line when A calls B, A will get notice: busy, please hang up. If A want to connect B as soon as B is in idle, he
can use redial function at the moment and he can dials an appointed prefix number plus B’s number to realize redial
function.
What is redial function? A can’t not build a call with B when B is in busy ,then A will subscribe B’s calling mode at 60
second intervals. once B is available, A will get reminder of rings to hook off, while A hooks off, A will call B automatically.
If at this time A is occupied temporarily and unwilling to contact B, A also can cancel the redial function by dialing an
appointed prefix plus B’s number before making the redial function.
*3* is appointed prefix code. After making the above configuration, A can dial
*3* plus B’phone number to make the redial function.
