![background image](http://html.mh-extra.com/html/chief/sl-100/sl-100_instruction-manual_2600980016.webp)
15
Instruction Manual
SMART-LIFT Electric Ceiling Lifts
1.
Install a wire between terminal 5 (extend/retract common) and
the ground/common of a power source (5-30 volts).
See Figure 15.
Example: Use 12 volt internal power supply terminal #9
as shown in Figure 16.
2.
Connect wires from pushbutton to power supply source (5-30
volts) and terminal #6 (extend/retract). See Figure 17.
3.
Connect power source.
4.
Push the button once and the unit should extend. Push the but-
ton during travel and the unit will stop at that location. Push the
button after the unit is extended or stopped in mid-travel and
the unit will retract.
Figure 17. Pushbutton Connection
Figure 16. 12 Volt Internal Supply Jumper
Figure 15. Extend/Retract Common
Summary of Contents for SL-100
