![background image](http://html.mh-extra.com/html/chief/sl-100/sl-100_instruction-manual_2600980023.webp)
Instruction Manual
SMART-LIFT Electric Ceiling Lifts
22
Remote (RC-10)
Wire for remote (RC-10) operation as follows (see Figure 33):
1.
Install a jumper wire between terminals #6 and
terminal #2 (see Figure 34).
2.
Connect the white wire of the RC-10 controller unit to
terminal #1 (see Figure 35).
3.
Connect the red wire of the RC-10 controller unit to
terminal #2.
4.
Connect the black wire of the RC-10 controller unit to
terminal #5.
5.
Connect the power source to the lift.
NOTE: If the unit does not activate, check to make sure the 9 volt
battery is working and make sure the dip switches in the send-
ing unit match the dip switch settings in the controller unit (see
Figure 36).
Figure 34. Contacts Connection
Figure 35. Contacts Connection
Black lead
Red lead
RC-10 Controller
Circuit Board Box Assembly
RC-10 Remote
Figure 33. Contacts Connection
Figure 36. Dip Switches
Summary of Contents for SL-100
