CHIEF SL-100, Instruction Manual

Page: 19 / 32

Instruction Manual SMART-LIFT Electric Ceiling Lifts
18
12 Volt Out Supply
This internal power supply can be used to power external devices
&/or to initiate specific functions (see Pushbutton operation and
Figure 25).
1. Connect one lead to 12 VOLT GROUND (terminal #9).
2. Connect one lead to 12 VOLTS OUT (terminal #10).
24 Volt Out Supply
This internal power supply can be used to power external devices &
remote controllers (see Figure 26).
1. Connect one lead to 24 VOLT COMMON (terminal #2).
2. Connect one lead to 24 VOLTS OUT (terminal #1).
Two Dry Contact Closures
NOTE: Dry contacts are rated for 1 Amp @ 24 volts.
These contacts can be used to complete circuits to external devices
(see Figure 27).
1. Connect one lead to terminal #12 (common).
2. Connect one lead to terminal #14 (closes when unit reaches full
extension).
3. Connect one lead to terminal #13 (closes when unit is fully
retracted).
Figure 25. 12 Volts
Figure 26. 24 Volts
Figure 27. Dry Contacts