Chicago Pneumatic CPF 270, Instruction Book

Page: 55 / 122

(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
• Press the Escape key on the controller to go to the main Week Timer menu. Select Remaining Running
Time from the list and press the Enter key on the controller to Modify.
(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
• This timer is used when the week timer is set and for certain reasons the compressor must continue working,
for example, 1 hour, it can be set in this screen. This timer is prior to the Week Timer action.
(1) Week Timer
(2) Week action schemes
(3) Remaining Running Time
In the regulator, different timers can be selected on one day (up to 8 actions). It is however
not possible to programme 2 actions at the same time. The solution: keep 1 minute in
between 2 actions. For example Start Compressor: 5.00 AM Pressure Setpoint 2: 5.01
AM.
Instruction book
2920 1796 01 53