Chevrolet Traverse 2015 Owner'S Manual Download Page 268

Page: 268 / 435

Black plate (31,1)

Chevrolet Traverse Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

7576032) - 2015 - CRC - 3/27/14

Driving and Operating

9-31

SET

–

Press briefly to set the

speed and activate cruise control.
If cruise control is already active,
use to decrease vehicle speed.

[

(Cancel):

Press to disengage

cruise control without erasing the
set speed from memory.

Setting Cruise Control

is on when not in use, SET

–

or +RES could get pressed and go
into cruise when not desired. Keep

off when cruise is not

being used.

The cruise control light on the
instrument cluster comes on after
the cruise control has been set to
the desired speed.

1. Press

to turn the cruise

control system on.

2. Get up to the desired speed.

3. Press and release SET

–

4. Remove foot from the

accelerator.

Resuming a Set Speed

If the cruise control is set at a
desired speed and then the brakes
are applied or

[

is pressed, the

cruise control is disengaged without
erasing the set speed from memory.

Once the vehicle reaches 40 km/h
(25 mph) or more, press +RES. The
vehicle returns to the previously set
speed.

Increasing Speed While Using
Cruise Control

If the cruise control system is
already activated:

Press and hold +RES until the
desired speed is reached, then
release it.

To increase vehicle speed in
small increments, press +RES
briefly. For each press, the
vehicle goes about 1.6 km/h
(1 mph) faster.

The speedometer reading can be
displayed in either English or metric
units. See

Instrument Cluster on

page 5-12

. The increment value

used depends on the units
displayed.

Reducing Speed While Using
Cruise Control

If the cruise control system is
already activated:

Press and hold SET

–

until the

desired lower speed is reached,
then release it.

To slow down in small
increments, press SET

–

briefly.

For each press, the vehicle goes
about 1.6 km/h (1 mph) slower.

The speedometer reading can be
displayed in either English or metric
units. See

Instrument Cluster on

page 5-12

. The increment value

used depends on the units
displayed.

Summary of Contents for Traverse 2015




















































































































































































































































































































































































































































Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands

Chevrolet Traverse 2015, Owner'S Manual

Search results

Summary of Contents for Traverse 2015

Reviews:

Related manuals for Traverse 2015

Brands by name

Popular brands